KAPA ENGINEERING

Biomass - Sludge - Digestate - Agrofoods

PHYSIS 848 / 848i

The hourly capacity and the characteristics of the machine depend on its configuration and the nature of the material to be treated. The chemical-physical properties of the material may differ from the values ​​reported in the technical data sheet which reports typical values ​​detected by our installations. The customer assumes the responsibility of carrying out all the necessary tests on the material he intends to dry, at laboratories of his choice. We do not carry out any tests at our company or at the premises of our other customers.
We do not communicate our customers' data in compliance with the GDPR - General Data Protection Regulation.

GALLERY EXPLORE THE MACHINE

 Capacity per hour*

 Up to 5.200

 Liters / hour

Wet biomass up to 75%

Dry up to 5%

Sludge / Digestate up to 75%

Dry up to 5%

Foods, Agricultural products

Dust / granular

 Construction material

 Steel/ Stainless steel AISI 304 - AISI 316

 

 Modules N.

8

 Units

Material's total treatment path

 48

Meters

 Output material humidity control

 Microwave sensor

 Automatic forward speed control

Computerized

 Input material humidity control

 Optional

 Microwave sensor

Thermal power required

 0,7 -  1,3

MWh

Biomass / Sludge

Direct conduction exhaust gases / air

Foods and feed

Heat exchanger

Dust separating system

Optional

Cyclone with rotary valve

Water and thermal energy recovery system

Optional

Condenser / economizer

Mini feeder on top

Automatic feeding

Ground level feeder for biomass

Optional

Silo and feeding screw

Ground level feeder for sludge

Optional

Mixing silo and feeding screw

Hot air / gas fan

20000 m3

Exhaust gases / vapor extraction fan

25000 m3

Moving grate biomass burner

Optional

1,2 MWh

Industrial gas burner

Optional

1,2 MWh

Hot air generator for food and feed

Optional

20000 m3 / 250o C

Insulation / Paneling

Optional

Polyurethane panels 30 mm

Exhaust gases /air mixture adjustment valves

Optional

Refractory automatic valves

* The hourly capacity depends on the nature of the treated material and its chemical and physical properties.

Dimensions

Length

7000

mm

Width

3800

mm

Height

5900

mm

Weight

Dryer only without options and peripherals

9800

kg

Electrical power required

Dryer only without peripherals (max rated)

85

KWh

Electronics

Automatic forward speed control

CFV Inverter VFD 380V

Control and settings screen

10'' in color with graphics and guide

Control panel

2-door panel  1200X1800X400

Output humidity control

Microwave sensor

Output humidity control

Optional

Sensor NIR sensor

Input humidity control

Optional

Microwave sensor

Input humidity control

Optional

Sensor NIR sensor

Data logging (Time, Temp, Quant.)

USB Flash drive

Remote Control, Assistance

Requires internet access

Remote Control, Client

Optional

Requires internet access

Certifications/Warranty

Manufacturing defects warranty

12 months

CE conformity

Dryer and peripherals

ATEX Certification

Optional

For all electric gearmotors

Additional services

4 months remote support

Weekdays / opening hours 9.00-18.00 CET

Annual remote support

Optional

Weekdays / opening hours 9.00-18.00 CET

Repair intervention

Optional

To be agreed

Installation / Testing / Commissioning

Optional

To be agreed

Half-yearly maintenance (Italy)

Optional

Annual contract

Half-yearly maintenance (Europe)

Optional

Annual contract

Half-yearly maintenance (Rest of world)

 

Annual maintenance (Italy)

Optional

Annual contract

Annual maintenance (Europe)

Optional

Annual contract

Annual maintenance (Rest of world)

 

Shipping (Italy)

Optional

To be agreed

Shipping (Europe)

Optional

To be agreed

Shipping (Rest of world)

Optional

To be agreed

*Varies according to the materials to be dried. Capacity based on granular materials with initial moisture 65% and weight 800 kg per cubic meter with moisture removal up to 12-15%.

The principle of PHYSIS

Caramelization is a phenomenon that occurs in the sugar structure of materials that are heat treated, producing a dark coloration of the material. It occurs to the sugars of ketones and glucose present in the raw materials. It occurs at high temperatures, releasing pigments and the smell of rotten fruit. Furthermore, the sugars form a hard crust on the external surface of the granule, resulting in the trapping of water inside. In rotary dryers, the flame is introduced right at the entrance of the material, thus creating a thermal shock in the pomace, causing the effect on the external layer of the granule. To force the water trapped in the heart of the granule to come out, increasingly larger quantities of heat are required, causing an infinite cycle that aggravates the phenomenon. Furthermore, in dryers, steam continually advances with the material, which, being hot, reabsorbs the humidity of the environment. These aggravating parameters have the consequences of insufficient drying, odors and a dark coloration of the biomass.

© Kapa Engineering srl  2024